![Brave_SirRobin](/img/default-banner.jpg)
- 23
- 669 497
Brave_SirRobin
United States
Приєднався 1 сер 2012
Whatever takes my fancy.
Adding Aux - Fixing Sonos Play:1's Biggest Flaw
Why oh why, Sonos, why did you make such wonderful speakers and leave out the most basic functionality. To save these from going into the landfill, I took it upon myself to do a little research and make this video showing the process for adding auxiliary input to these speakers.
**NOTE**
This mod as I have shown it only enables the mid-driver. If you want to have the functionality of tweeter, you will need to add an additional low/high pass filter due to the intricacies of how this system was made. Below I will provide a link to the guide that helped me to make this video as well as go more in-depth on how and why each modification was done, including the use of a filter to enable the tweeter. Having just the mid-driver does provide adequate sound, however, which is just fine for the purpose this will serve.
Helpful links:
www.instructables.com/Add-Bluetooth-to-Sonos-Play1/
www.ifixit.com/Guide/Sonos+Play+1+Motherboard+Replacement/50818
Music by Jahzzar:
Track 01 - The last ones
freemusicarchive.org/music/Jahzzar/Smoke_Factory/The_last_ones
Track 02 - Roads that burned our boots
freemusicarchive.org/music/Jahzzar/Blinded_by_dust/Roads_that_burned_our_boots
Track 03 - Glass half empty
freemusicarchive.org/music/Jahzzar/Scenes_from_the_Zoo/glass
**NOTE**
This mod as I have shown it only enables the mid-driver. If you want to have the functionality of tweeter, you will need to add an additional low/high pass filter due to the intricacies of how this system was made. Below I will provide a link to the guide that helped me to make this video as well as go more in-depth on how and why each modification was done, including the use of a filter to enable the tweeter. Having just the mid-driver does provide adequate sound, however, which is just fine for the purpose this will serve.
Helpful links:
www.instructables.com/Add-Bluetooth-to-Sonos-Play1/
www.ifixit.com/Guide/Sonos+Play+1+Motherboard+Replacement/50818
Music by Jahzzar:
Track 01 - The last ones
freemusicarchive.org/music/Jahzzar/Smoke_Factory/The_last_ones
Track 02 - Roads that burned our boots
freemusicarchive.org/music/Jahzzar/Blinded_by_dust/Roads_that_burned_our_boots
Track 03 - Glass half empty
freemusicarchive.org/music/Jahzzar/Scenes_from_the_Zoo/glass
Переглядів: 28 177
Відео
Installing aFe Axle Back Exhaust for 2018+ Hyundai Elantra GT Sport (N Line) & Test Drive!
Переглядів 5 тис.4 роки тому
2018 Hyundai Elantra GT Sport 1.6T with SXTH Element Short Ram Intake System and aFe Axle Back Exhaust (obviously, haha) Music: "Buddy" "Energy" from Royalty Free Music from Bensound - www.bensound.com/royalty-free-music/
Panasonic GX85 4K Video Sample - Florida Museum of Natural History
Переглядів 5887 років тому
Pictures: drive.google.com/drive/folders/0B7n3JIrMvonCZllJYXFtTE9VSlE?usp=sharing Music: www.bensound.com/royalty-free-music ...aaaand I misspelled available so don't even go there.
How-To: Paracord Camera Wrist Strap (GX85 Test)
Переглядів 20 тис.7 років тому
This video is the first on my channel to be recorded on a Panasonic GX85. I just got the camera, and it absolutely runs circles around my 70D. Music: Danger Storm Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License creativecommons.org/licenses/by/3.0/
Virginia Open Spring 2017 - My First Comp
Переглядів 1547 років тому
cubecomps.com/live.php?cid=2142&compid=56
Alienware 15 R3 Kaby Lake Repaste Update
Переглядів 24 тис.7 років тому
As Idris Kahil helpfully pointed out, the differences in core temperatures are about the same before and after the repaste, but the temperatures on all cores dropped 20C from their previous maximums. Full repaste guide: ua-cam.com/video/JIszvVpSq2U/v-deo.html The CPU dropped an astounding 20C, and the GPU went down by 5C; not Earth shattering by any means, but it's something.
Alienware 15 R3 Repaste (GTX 1070)
Переглядів 92 тис.7 років тому
This 15 R3 has the 6820HK and the GTX 1070. You may think the pre-applied paste looks familiar, and that is because it is actually Arctic Silver 5. This is my second attempt at repasting and the Arctic Silver really didn't do a very good job. (Maybe it was too thick?) The Thermal Grizzly paste did perform marginally better, but still too hot for comfort. Even after undervolting by -0.150v in XT...
Samsung 256GB EVO+ Unboxing & Benchmark
Переглядів 60 тис.7 років тому
Ugh why do I have to sound so fucking pretentious?? I'm never going to script a video like I did this one again. Quick unboxing/benchmark of Samsung's new flagship micro SD card. Does it perform? 3:30 Broken Reality Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License creativecommons.org/licenses/by/3.0/
HiFiMan - HE-400 Headband Replacement
Переглядів 10 тис.8 років тому
I love these headphones, but the headband is failing... I know! I just need to get my hands on the 400i's headband and just use that in place of the old one. I also found an online guide here: www.head-fi.org/t/790902/the-ultimate-step-by-step-hifiman-headband-replacement-guide-from-oldstock-hifiman-he-4-5le-6-400-500-into-the-newstock-he-400i-560 "Monkeys Spinning Monkeys" Kevin MacLeod (incom...
XR2206 Function Generator Assembly + Demo
Переглядів 17 тис.8 років тому
I got the function generator from Ebay for ~$10. There is no power supply included. (Operates off 9-12V DC) Music: "Call to Adventure" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 creativecommons.org/licenses/by/3.0/
Shameful Display. (DSO138 Unboxing)
Переглядів 4908 років тому
Wasn't this supposed to be a kit...? My iron was hot and everything... :(
Acer E5 573G 52G3 SSD Installation
Переглядів 91 тис.8 років тому
I got the laptop from Amazon: www.amazon.com/gp/product/B012IBOCRU?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00 "Monkeys Spinning Monkeys" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 creativecommons.org/licenses/by/3.0/
MoYu Cubic AoFu 7x7 GT (Stickerless)
Переглядів 10 тис.8 років тому
First turns/solve: 3:00 I got my cube from The Cubicle: thecubicle.us/moyu-cubic-aofu-... So far so good; I have had this cube for a week now. The spring sound is gone, and it is very smooth. After proper tensioning, there are few lockups and no pops to speak of. I am very satisfied with this puzzle, and it is highly recommended for those who want to start exploring larger cubes, or to simply a...
LEGO Technic Bulldozer Build Timelapse (42028)
Переглядів 28 тис.10 років тому
LEGO Technic Bulldozer Build Timelapse (42028)
How to run GTA 4 in Windows 8/10 (Steam)
Переглядів 256 тис.10 років тому
How to run GTA 4 in Windows 8/10 (Steam)
Totally a Butcher job getting an Power amp module from Amanzon and eliminate all Just use the existing power supply and the speaker. Or better install a 4066 and use some logic to switch Sonos to Aux input or a bluetooth module mentioned below.
toooo muchhhhh work buy used sonos 5 you will thank me later
Since my Sonos One is as good as dead... I'll muster the courage to chop it up! 😂
I have an R3, which is now just a spare computer in my household. The thing runs its fans at full blast 24/7, so I think it's time for a repaste.
Kinda sad that Sonos didn't do that natively. Who makes speakers that don't have an aux output??? Ugh. Cool to see it was possible but unfortunately most of us don't have the know how to do what you just did. Congrats to you though. It worked!
Thanks bro ❤
cba !
Informative, but video too fast… also closeup not clear enough. Two ⭐️ ⭐️
Just did my 15 r 3 today perfect video
and the sound of the sound is like this, change it normally, but I can 3 speakers, if I can’t reset the sound, and I think it’s possible to just sound the active speakers without bells and whistles, but the input opir does not set the frequencies and what kind of sound?
hes just wired it directly to the input area of the amplifier so if you have both sources playing it will play together as one output i assume
Gahdamn. I wished I watched your video before repasting mine. Dell's instructions were to defuse a bomb with the whole prerequisite thing. I'mma do this next time I repaste. Mine is an Alienware 17 r5 btw. Same disassemble path as OPs if anyone's wondering.
My new ssd not detected
I like how the important part is left out. Red wire just appears out of nowhere! Then cam pans away. Thanks
We live in interesting times and can certainly use all the sarcasm we can get. Kudos James.
@@geraldhenrickson7472 If you enjoy it so much then I shall attempt to brighten your day... This video was so well explained, I really appreciate that he took the time to show us exactly where to solder the first wire! If he hadn't zoomed in and showed us the exact spot then this video might be confusing to a lot of people... which it definitely isn't. That was really thoughtful of him and I am definitely going to do this right now. I am also going to drill a few more holes in the circuit board and spray it all bright purple, because the voices in my head said it would triple the sound quality!! Peace from Ireland to you all (that bits genuine).
someone could tell me? I wonder does it still works like before on wifi? or it just now works by the cable? if it runs both ways its awesome
Are the screws inside the grill and near the tape, the same size as the ones on the base? It seems that the same tool.does not fit the inside ones
I have a really nice old receiver that the control circuit failed on. This video is encouraging me to see if I can bypass that and go directly to the amplifier. Thanks for the inspiration.
Did this to mine! Thanks!
Try using q tips bud
I can't for the life of me get the backside back on. The corner with the headphone jack and SD-card makes it so difficult. Edit: eventually I got the headphone jack into place by carefully lifting the motherboard with a thin screwdriver.
Want to know one of the biggest annoyance is for people who are blind or visually impaired? A video like this with no narration.
thats like 0.1% of all viewers
It’s just that music is one of the very few activities that blind and visually impaired people like me can fully participate in. from what I can tell this video has a lot of good information that I would love to be able to get access to and use in my music
@@burgercide Ask someone who can see to narrate it for you then 😂
@@user-wc6pp4mi6t How soon can you get here?
Your choice of words says it all. Mega indifference and zero compassion. You do your species proud.
Lol I was hoping to see a simple adapter connection or something. This guy is Tony Stark
Wow. I love it when someone has a problem or need and just takes the initiative to figure it out. DIY level 100.
Nvme ssd support
Well done! I've left the lan and exit from the bottom near the power line. Be sure, doing this hack, to exit also with a line out from the woofer so you can add any active sub with speaker line in.
Thanks for the video, please give me a link to buy that SSD
Where is the GPU? And can it be replaced and upgraded?
awesome! This is golden! Exactly what I have been looking for. I have two great sounding Symfonisk speakers, and I want to use them as fronts to my TV, in a surround setup they can only act as rears, how silly is that.. But some more closeups would be great, how to identify where exactly to connect the wires? Edit I just read above comment, about the tweeters.. thats a shame...
How is the latency?
Needs a good close still image of where the connection point is for the aux. Also note this only makes use of the full range speaker and does not use the tweeter. See videos on adding bluetooth for those connection points an how to use both speakers.
oh wait.... no tweeter? Hm ok in that case.... thats a shame
which particular videos are you referring to. all the sonos BT videos that i can find are about how to use the AUX port, which this device does not have.
Great video. I have the same pair and they've been through a lot. My favorite little "mod" i did to them was scraping the original cable connectors on each ear piece and hard wiring my own cable in. Couldn't stand the connectors breaking all the time and how hard they were to fix!!
This model cant both SSD and HDD ?? or must replace hdd with ssd
Tell us if you upgrade your!
What is the name of the plat or wrap?
Did you recently sell your exaust on ebay because I bought one with one of the exaust tips with a bolt that was a 14mm and the other was 13mm
Hmm it must have been a while ago. Because of used car prices so high, I sold out and bought a G35 to throw around for a while.
Do you need a tune after exhaust or airbox mods? I know the Honda si does or you might get a code.
No your fine I have this exact same exaust and I don't have any codes
Lol.... my computer crashed while playing Age of Empires so I went to this video to check into my computer reheating. I put on my headset and was like... how did the game automatically start back up???
I’m torn apart between kryonaut or liquid metal conductonaut? Got temps are approaching 90C.which should I go with"
Dude, you need to get an Amazon Affiliate account and put a link to the paste you recommended so you can make some money off of people that love your video.
Did my 17r4 and now the gou doesn't work lol not found in device management or bios
Thank you for video. One detail regarding Killer 1435 WLAN card antenna connectors aren't explained. In my case I abandoned attempt for repasting after breaking WLAN card antena connector, it is frustrating. I didn't use force, but it is so fragile and currently waiting for new card.
Epic! Thank you
I’m on my fourth repaste I use your video everytime lol. I’ve use kryonaut everytime but I’m gonna try thermalright TFX for the first time
4th?! Dang, I haven’t done mine yet and I’m trying not to, seems like it’s be easy to mess something up in there
@@curtdontcare yeah I kept using kryonaut and it kept blowing out, it’s been a week now and the TFX is doing way better! Just be careful and it’ll go Easy. Make sure to clean the fans while you’re at it
really helpful, Thanks!! for the upload.
Do you need to use a specific thermal paste, or will any work?
I splurged on Alienware 15R3 3+ years ago (also 7820hk and GTX 1070) and was rather disappointed, the laptop had myriad of issues from day 1 and after fixing them it was still underperforming, overheating being one of the issues. First and last Alienware I ever bought :|
why doesnt yours have mounting screws... mine has mounting screws
Thanks for the short cut! Last time I repasted I followed Dell's disassembly instructions and basically disassembled the whole laptop. Now I can finish the repaste in less than half the time it took me last time.
Hello mate! Please tell me, after a while - are you don't disappointed with this modification? Does it interfere with long journeys? Weren't there any cases when the cops stopped you for this modification? I want to install the same exhaust, but I doubt whether this modification will bother a one-year-old child in a car ...
If you have a younger child, I would not recommend changing the exhaust on the car since the increased noise could make it less comfortable. There is an areo component to the underside of the stock exhaust that helps to reduce wind noise and vibration and that is exactly what you want when the car needs to sound and feel smooth.
@@ln103815 Ok, thank you!
hdd and ssd same size?
Ayo I need to fix my laptop. It’s an Alienware 15 r3 and it’s like three years old, when I try to play overwatch now the gpu gets to 91 degrees and my cpu gets to like 100. (Celsius) when it hits that temperature it starts to have random framerate drops and makes it too hard to play. I’ve undervolted it, I’ve Turned off turbo boost, and nothing. I don’t have an intact warranty on it I don’t think, will a repaste work?
Yes a repaste will definitely fix the issue